Because Restor-A-Finish preserves and restores beauty to the original wood finish, it helps preserve the antiques authenticity and value, whereas stripping the finish may literally strip the piece of its value. Howard Products, Inc. ** If a high gloss finish should appear dull due to the use of steel wool, polish it out with Restor-A-Shine Polishing Compound. United States (excluding Alaska & Hawaii) Shipments only. Time to fill this bad boy with great products like gadgets, electronics, housewares, gifts and other great offerings from Groupon Goods. Its recommended that you test Restor-A-Finish in an inconspicuous spot to make sure you like what it does and how it matches the finish. CAUTIONS Use only with adequate ventilation. CAN I USE MY MINWAX HARDWOOD FLOOR CLEANER ON FINISHED HARDWOOD FLOORS, LAMINATES, AND PRE-FINISHED FLOORING? Keep container closed. Do not pour directly on finish. Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Saves time compared to staining with one product and protecting with another, Can be used over bare wood or over an existing polyurethane finish; over a properly prepared floor, this product allows you to change the color of your floor without sanding down to bare wood. Minwax Hardwood Floor Cleaner can be used on surfaces such as laminates and pre-finished floors in addition to hardwood floors. WHAT ARE THE ADVANTAGES OF USING MINWAX HARDWOOD FLOOR CLEANER? CONTENTS MAY CATCH FIRE. Wash hands after using. Color: Brandy Wine. If breathed in, move person into fresh air. This item is sold through the UnbeatableSale operated by Unbeatablesale.com inc.. Choose the color of Restor-A-Finish that best matches the finish of your wood. Do not swallow. EYE CONTACT: Immediately flush with water for at least 15 minutes. These super fine lines in the finish from a distance creating the look of dullness on high gloss finishes and can be easily buffed away with Restor-A-Shine Polishing Compound. Restor-A-Finish penetrates faded lacquer, shellac, and varnish finishes to bring back the original color and luster. To remove stubborn white rings, oxidation, or light scratches, apply Restor-A-Finish with a pad of super fine (0000) steel wool. Minwax Super Fast-Drying Polyurethane for Floors is a clear, oil-based, durable, protective finish specifically formulated for use on hardwood floors. First time purchase only, local category deals. DOES MINWAX HARDWOOD FLOOR CLEANER NEED TO BE MIXED WITH WATER? Almost any existing wood tone, from a light Birdseye Maple to a dark Jacobean, can be closely matched using one of the nine available finish colors. Not recommended for floors or exterior surfaces. FIRST AID: If swallowed, DO NOT INDUCE VOMITING, Call Physician immediately. It restores the depth of grain in wood finishes, going much deeper than temporary scratch cover products. *Minwaxs #1 claim above is based on Epicor's Industry Data Analytics and third-party survey results for interior wood stains for the 12 month period ending 12/21. To avoid breathing vapors, open windows and doors or use other means to ensure a cross ventilation of fresh air through work area. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 560 Linne Road Be careful to protect fabric, carpets, or linoleum when applying Restor-A-Finish, as it may leave a permanent stain. Close container after each use. Our goal is to provide products made with the finest material and consistent and high quality processes.Features. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. No need to put another finish on top, just Feed-N-Wax. For best results, wait at least 30 minutes and then apply a coat of HowardFeed-N-Waxto protect andmaintain the newly restored finish. Yes. Apply with a small pad of cloth, cover a small area at a time and immediately wipe dry. Minwax 220271 1 gal Complete 1-Step Floor Finish, Satin - Brandy Wine, We strive to provide new innovative products to meet the need of the rapidly changing world we live in. Tag @minwaxusaon Instagram to have your project featured. Unlike other surface cleaners, Minwax Hardwood Floor Cleaner is designed to clean wood floors without leaving a residue, which other all-purpose cleaners may leave. MAY IRRITATE EYES. This product is made from the finest raw materials available and manufactured to proven formulation under strict quality control for its intended use on natural wood finishes. Minwax Ultimate Floor Finish works well for any hardwood floor and is ideal for light colored woods like maple and over light colored stains. A two-in-one stain and protective finish that provides superior durability for hardwood floors. Always wipe off excess Restor-A-Finish. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority. Finishes vary in hardness, so test pressure to be used with (0000) steel wool on an inconspicuous spot. Always test stain on a hidden area of the wood to verify desired color. Wait 30 days to dry if using polyurethane or other clear coat finishes on top of Restor-A-Finish. Test on an inconspicuous area. Do not usepolyurethane over Restor-A-Finish. Paso Robles, CA 93446 Minwax Hardwood Floor Cleaner will not permanently damage wood. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. Also, Restor-A-Finish may not be able to penetrate harder plastic finishes, imitation simulated wood finishes, or some hard polyurethane finishes. Cleans up with soap and water Specifications. First time purchase only, local category deals. White heat rings and watermarks, sun fade, oxidation, smoke damage, and most other blemishes can be quickly blended away. If spilling does occur, immediately scrub area with soap and water or a stain remover and wipe dry. To protect and maintain the newly restored finish, follow up with Howard Feed-N-Wax. FUMES MAY CATCH FIRE. Treating carved woods: Restor-A-Finish has saved many hours of labor by quickly restoring color and depth of grain on carved wooden furniture, clocks and picture frames. WARNING: This product can expose you to chemicals including Ethylbenzene, which are known to the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. The only warranty extended, expressed or implied, is for defective workmanship or materials. However, results obtained with the use of this product under a variety of conditions may depend on circumstances beyond our control. Keep out of reach of children. USE WITH ADEQUATE VENTILATION. First test Restor-A-Finish on a small inconspicuous area to check results, penetration into the finish, correct color, and if to use (0000) super fine steel wool or a soft cloth. SKIN CONTACT: Wash with soap and water. If the product is accidentally left on a wood surface finished with wax or oil, the finish may turn white, as it would if water were left on it for a long period of time. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. Its water based formula makes it lower in odor than solvent based products and there is easy clean up with soap and water. Use on bare wood or over existing polyurethane finish. DO NOT TAKE INTERNALLY. Restor-A-Finish penetrates and permanently restores most wood finishes without removing any of the existing finish - this is why it is very popular for antiques. Restor-A-Finish should be used in a color that best matches your finish. They have been reproduced using digital production techniques. WHAT HAPPENS IF MINWAX HARDWOOD FLOOR CLEANER IS ACCIDENTALLY USED IN EXCESS ON OILED, WAXED OR RAW WOOD SURFACES? KEEP OUT OF THE REACH OF CHILDREN. Other finishes will require a little more work. If the application of more finish does not repair the whitened areas, then reapply the oil finish using fine steel wool. Restor-A-Finish is a unique finish-penetrating formula that contains a small amount of stain combined with just the right amount of solvent and restoring oils, giving it the unique ability to penetrate and permanently restore most existing finishes without removing any of the existing finish. Finish: Satin. Sign in to get personalized notifications about your deals, cash back, special offers, and more. Do not transfer contents to bottles or unlabeled containers. To protect the newly restored finish Feed-N-Wax is recommended as a follow-up to Restor-A-Finish. Shipping and handling charges will be $9.99. Some dry faded finishes will only require a quick wipe-on, wipe-off application and will quickly absorb Restor-A-Finish. When using a soft cloth or steel wool, rub with light pressure but hard enough to blend away the damage. Do not mix with other chemicals. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH/MSHA approved with organic vapor filter) or leave the area. Contains Hydrogenated Mineral Oil, Isopropanol, Acetone. Get medical attention if irritation persists. Restor-A-Finish maintains the original "patina" of an antique finish, maintaining its character and value as an antique. Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. See whats possible, and then make it happen. Avoid contact with eyes and skin. Rub lightly in the direction of the wood grain until blemish is blended away. Keep in mind that the purpose of Restor-A-Finish is to restore an existing finish. Permanently revive and restore the original color and luster in one step, without removing any of the existing finish. Call Us: 805.227.1000 Fax Us: 805.227.1007, Restor-A-Finish is a unique finish-penetrating formula that restores wood finishes while blending out minor scratches, blemishes and abrasions, Available in nine colors to match almost any wood finish tone; Neutral, Maple-Pine, Golden Oak, Cherry, Walnut, Mahogany, Dark Walnut, Dark Oak, and Ebony Brown, With a simple wipe-on, wipe-off process, most finished wood surfaces that seem to need a complete refinishing job can be restored in a few minutes, Removes white heat rings and water marks, sun fade, oxidation, smoke damage and most other blemishes, Restor-A-Finish restores the finish without removing any of the existing finish, Before you go to the extreme of stripping it, restore it. CONTENTS HARMFUL. Restore-A-Shine is perfect for the final step in restoring high gloss finishes by buffing away fine scratches only seen in the light. MAY IRRITATE SKIN. Keep away from flames, such as a pilot light, and any object that sparks, such as an electric motor. For over50 years, Howard's Restor-A-Finish has been a standard in the antique industry. As you restore the finish be sure to periodically check your progress. All finishes are different, so testing first may be required. Before you go to the extreme of stripping it, try restoring it! May not work well on one step stain and poly finishes. Then re-apply Feed-N-Wax as needed, or when the finish starts to look dry. Capacity: 1 gal, See Promotional Terms. Howard Products, Inc. and the seller therefore disclaim any responsibility for expense or consequential damage of any kind. Do not get in eyes, on skin or clothing. Still other finishes may require leaving the Restor-A-Finish on longer so it can penetrate into the finish and restore color and depth of grain deep into the wood. Do not smoke. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. The colors shown are for reference purposes only. No sanding between coats. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Orders are typically delivered in 5-10 business days. Before using this product in the workplace, read the Safety Data Sheet (SDS) available online. Most wood finishes that seem to need a complete refinishing job can be completely restored in a few minutes with this simple wipe-on, wipe-off process. Apply Restor-A-Finish to a small area at a time and always wipe dry. Minwax Complete 1-Step Floor Finish is a two-in-one stain and protective finish that provides superior durability for hardwood floors. This product is intended for occasional use only. If you are uncertain about which color to use, then choose a color slightly lighter than your finish. By subscribing, I agree to the Terms of Use and have read the Privacy Statement, Do Not Sell or Share My Personal Information, Multi-color, Orange Home Safety & Security, Multi-color, Purple Home Safety & Security, Multi-color, White Home Safety & Security, Silver, Multi-color Home Safety & Security, Dimensions: 5.0 inches (H) x 8.0 inches (W) x 10.0 inches (L). Product eligible for free returns within 30 days. Always rub with the grain of the wood. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Minwax Super Fast-Drying Polyurethane for Floors. The merchant is solely responsible to purchasers for the fulfillment, delivery, returns, care, quality, and pricing information of the advertised goods and services. Avoid prolonged contact with skin. Minwax Hardwood Floor Cleaner has been exclusively formulated for use on hardwood, laminate, and pre-finished floors. Simply apply Restor-A-Finish with a small paintbrush or soft toothbrush and wipe dry. Keep container closed when not in use. For more information go to www.P65Warnings.ca.gov. Finish floors 2x faster. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Do not transfer contents to other containers for storage. Cover a small area at a time and wipe dry. CAUTIONS: DANGER. Store in a cool place. By subscribing, I agree to the Terms of Use and have read the Privacy Statement, See Promotional Terms.

Sitemap 33